Magnet adsorption wall-climbing robot platform

Home > Robot Platform > Remote control platform of magnet adsorption wall-climbing robot

Magnet adsorption wall-climbing robot platform

It is suitable for steel structure surface
It is suitable for curved surfaces with radius of 1m and above
It can stride obstacles with a height of 0.5 cm and seams with a width of 1 cm.
It has stable suction and is capable of climbing high.
The effective remote control distance is 1 km

It can be applied to non-destructive detection, paint spraying and surface cleaning for large-scale steel structures.
It can be especially applied to scenarios high above the ground that manpower cannot reach.

Remote control platform of magnet adsorption wall-climbing robot

It is suitable for steel structure surface
It is suitable for curved surfaces with radius of 1m and above
It can stride obstacles with a height of 0.5 cm and seams with a width of 1 cm.
It has stable suction and is capable of climbing high.
The effective remote control distance is 1 km

It can be applied to non-destructive detection, paint spraying and surface cleaning for large-scale steel structures.
It can be especially applied to scenarios high above the ground that manpower cannot reach.

Technical parameters

Overall dimensions (Length × Width × Height )	535X235X410mm	Protection level	IP54
Dead weight of platform	5.5Kg	Battery (lithium iron phosphate)	24V 6.8AH
Maximum load	5Kg	Charging time	2.5h
Maximum running speed	4m/min	Continuous endurance time	1.5h
Suitable for surface	Steel structure surface	Edge Detection	Laser group 4
Maximum climbing angle	0 – 180°	Distance to transmit the image	≥1000m
Operating temperature	-10°C ~ +50°C	Remote control distance	≥1000m

*Parameters should refer to the current platform, and dimensions, loads and interfaces can be customized.

Technical parameters

Overall dimensions (Length × Width × Height )	535X235X410mm	Protection level	IP54
Dead weight of platform	5.5Kg	Battery (lithium iron phosphate)	24V 6.8AH
Maximum load	5Kg	Charging time	2.5h
Maximum running speed	4m/min	Continuous endurance time	1.5h
Suitable for surface	Steel structure surface	Edge Detection	Laser group 4
Maximum climbing angle	0 – 180°	Distance to transmit the image	≥1000m
Operating temperature	-10°C ~ +50°C	Remote control distance	≥1000m

*Parameters should refer to the current platform, and dimensions, loads and interfaces can be customized.

Product display