Home > Robot Platform > Vacuum wall-climbing robot remote-controlled platform

Home > Robot Platform > Vacuum wall-climbing robot remote-controlled platform

Vacuum wall-climbing robot platform

Due to vacuum adsorption mode, it is suitable for running on a clean plat surface (such as structural surfaces made of cement concrete, glass,and carbon fiber).

It can be applied to flaw detection, paint spraying and surface cleaning for cement concrete structures. It can be applied to curved surfaces after customization.

Vacuum wall-climbing robot platform

Due to vacuum adsorption mode, it is
suitable for running on a clean plat surface
(such as structural surfaces made of cement
concrete, glass, and carbon fiber).

It can be applied to flaw detection, paint
spraying and surface cleaning for cement
concrete structures. It can be applied to curved
surfaces after customization.

Technical parameters

Overall dimensions
(Length × Width × Height)
455X355X410mm Protection level IP54
Dead weight of platform 5Kg Battery 24V 6.8AH
Maximum load 2Kg Charging time 2.5h
Maximum running speed 4m/min Continuous endurance time 1.5h
Suitable for surface Steel structure surface Edge Detection Laser group 4
Maximum climbing angle 0~180° Distance to transmit the image ≥1000m
Operating temperature -10°C~+50°C Remote control distance ≥1000m

*Parameters should refer to the current platform, and dimensions, loads and interfaces can be customized.

Technical parameters

Overall dimensions
(Length × Width × Height)
455X355X410mm Protection level IP54
Dead weight of platform 5Kg Battery 24V 6.8AH
Maximum load 2Kg Charging time 2.5h
Maximum running speed 4m/min Continuous endurance time 1h
Suitable for surface Steel structure surface Edge Detection Laser group 4
Maximum climbing angle 0~180° Distance to transmit the image ≥1000m
Operating temperature -10°C~+50°C Remote control distance ≥1000m

*Parameters should refer to the current platform, and dimensions, loads and interfaces can be customized.

Product display

Product display